Active DIY Electronics Projects
(found 20 projects)
Ends more than three weeks from now
Craftphilia: World's First Fully Automated Tufting Machine
All-In-One Frame & Tufting System | Expandable Tufting Area up to 70×140 cm | Smart Automation, Unlimited Freedom
Current
3408%
Backers: 416
Funding: HK$2,688,721 of HK$78,888 (3408% funded)
Average daily pledges: HK$1,344,361
Campaign Dates: June 16th -> July 16th (2026)
Time left: 28 days, 9 hours, 23 minutes
Funding: HK$2,688,721 of HK$78,888 (3408% funded)
Average daily pledges: HK$1,344,361
Campaign Dates: June 16th -> July 16th (2026)
Time left: 28 days, 9 hours, 23 minutes
HUBi32 – The Cyberpunk ESP32-S3 Smart Desk & Dev Hub
Interactive USB Control, Real-Time Power Analytics, HID Automation, RGB Effects, Motion Sensing & Multimedia in One Futuristic Platform
Current
165%
Backers: 5
Funding: €825 of €500 (165% funded)
Average daily pledges: €413
Campaign Dates: June 16th -> July 16th (2026)
Time left: 28 days, 14 hours, 34 minutes
Funding: €825 of €500 (165% funded)
Average daily pledges: €413
Campaign Dates: June 16th -> July 16th (2026)
Time left: 28 days, 14 hours, 34 minutes
ILC1/7 VFD clock large Soviet vacuum fluorescent display DIY
A clock project for the large VFD tubes ILC1-1/7 model made in the Soviet era. It uses a preprogrammed microcontroller & standard parts
Current
0%
Backers: 0
Funding: $0 of $1,000 (0% funded)
Average daily pledges: $0
Campaign Dates: June 17th -> July 17th (2026)
Time left: 29 days, 21 hours, 43 minutes
Funding: $0 of $1,000 (0% funded)
Average daily pledges: $0
Campaign Dates: June 17th -> July 17th (2026)
Time left: 29 days, 21 hours, 43 minutes
MakerPlot 2.0 : Fully 3D Printable Arduino CNC Plotter DIY
Improved version of our fully 3D printable Minimal CNC Plotter. No Rails. No Bearings. Just Motion.
Current
591%
Backers: 79
Funding: €2,955 of €500 (591% funded)
Average daily pledges: €1,478
Campaign Dates: June 16th -> July 26th (2026)
Time left: 38 days, 13 hours, 33 minutes
Funding: €2,955 of €500 (591% funded)
Average daily pledges: €1,478
Campaign Dates: June 16th -> July 26th (2026)
Time left: 38 days, 13 hours, 33 minutes
SplitGo: Magnetic Modular Power Bank for EDC
A 5000mAh pocket power system with magnetic snap-on modules for charging, cooling, lighting, misting, and daily carry.
Current
116%
Backers: 14
Funding: $2,328 of $2,000 (116% funded)
Average daily pledges: $2,328
Campaign Dates: June 17th -> August 1st (2026)
Time left: 44 days, 9 hours, 54 minutes
Funding: $2,328 of $2,000 (116% funded)
Average daily pledges: $2,328
Campaign Dates: June 17th -> August 1st (2026)
Time left: 44 days, 9 hours, 54 minutes