Modular Ruins Scenery - 3D Printable - WTC/ETC compatible
A project in France, France by Wargamesceneries000days
:
00hours
:
00minutes
Funding Successful
3D printable ruins models for wargames sceneries and compatible for WTC and ETC competitions.
Backers: 44
Average Pledge Per Backer: €62
Funded: €2,731 of €500
Dates: Dec 17th -> Jan 31st (45 days)
Project By: Wargamesceneries
Backers: 44
Average Pledge Per Backer: €62
Funded: €2,731 of €500
Dates: Dec 17th -> Jan 31st (45 days)
Project By: Wargamesceneries
€2,731
current pledge level
Last Updated: January 31 @ 18:10 -0500 GMT
546%
of goal
(loading your very own snazzy kicktraq chart)
Latest News
And finally, One Part To Connect Them All 
January 30th - via: kickstarter.com
With this small part (the red one in the picture bellow), you can connect the demolished floors from the Two storey ruin to the others floors. (Of course, when you want to design your own structure, you can go highter and bigger !) The red part... (Read More)
Customisation items - Part 1 print tests + Part 2 release
January 28th - via: kickstarter.com
Hi everybody, We have performed a test print for the Customisation items - part 1, everything is fine with them ! We hope to have enought time before the end of the campaign to try a paint test. Customisation Item Part 2 Release We are glad to... (Read More)
Massive Test Print (Table 6 set + Container + Round Cover Terrain (=Industrial Vent))
January 28th - via: kickstarter.com
Hello everyone, We have been very busy lately! We haven't published much in the last few days as we were doing a massive test print, as you can see with the pictures below, we have printed and packed a complete set “Table 6” (4x Three storey... (Read More)
New pledge available : FDM Printed set
January 18th - via: kickstarter.com
After careful consideration, we believe that FDM is a really good compromise between quality and good price, then we have decided to propose 2 new pledges for the last days of the campaign. As you could see in our gallery, all our test prints are... (Read More)
WTC 2022 update + WYSIWYG update
January 17th - via: kickstarter.com
Hi guys, The WTC team has updated the terran map rules earlier this year. So far, no major update on the terran rules (except for the "Industrial Vent" - our "Difficult ground model"). Furthermore, in order to be more compliant with the rules, we... (Read More)
[Forest terrain] New model design : easy to print - easy to assemble - easy to store (test print done)
January 13th - via: kickstarter.com
[V2 update] : new model design : Easy to print (no supports) Easy to assemble (use the 3D printed cubes to glue the branches to the trunks) Easy to store (use 8*5mm magnets to disassemble the trunks from the base) Don't hesitate to post a comment... (Read More)
Stretchgoal 1 - Travel / storage box - Work in progress [Part 2]
January 11th - via: kickstarter.com
Hi everybody, We are almost done with the storage box model, you can see below the result of the test print ! In order to optimize the storage of the whole WTC set (which is quite big due to the number of buildings), we have designed a box which can... (Read More)
2022 major update - Combine the WTC compatible buildings in bigger structures
January 3rd - via: kickstarter.com
So ... ! We worked hard during the last couple of day to propose some majors improvements to the set as we wanted to propose something better than just a "WTC compatible set". So, we aim to go further with the possibility of the set by allowing to do... (Read More)
In response to Daniel's Comments
December 28th - via: kickstarter.com
Hi Daniel, Currently, the pillars are pierced from the top to the bottom with a 8mm diameter hole, so you can use any 8mm round thing to assembly the parts. It could be magnets or 8mm diameter cylinder. If needed, we can add some helpers on the... (Read More)
Stretchgoal 1 - Travel / storage box - Work in progress
December 20th - via: kickstarter.com
We want to share with you guys what we are working on this week : In parallel of the models improvement, we are working on the travel / storage boxes, and we think that the firsts results are good enough to share some pictures of the prototypes (all... (Read More)
What a start ... we are so close to our first goal
December 19th - via: kickstarter.com
Many thank to all of you guys for this great start ! We are moving forward on the tests prints and the models improvement. Our objective is to build a set which can be printed either in FDM or in SLA. We will regularly publish some pictures of the... (Read More)
If you have additional news that doesn't appear here, shoot us a link!