3D Printable Dice Tower (STL Files)
A project in Perth, AU by 3Mates Games000days
:
00hours
:
00minutes
Funding Successful
A 3D printable dice tower comprising of a base file and a tower file. Print multiple tower units to make the tower as high as you want.
Backers: 50
Average Pledge Per Backer: $6 AUD
Funded: $304 AUD of $100 AUD
Dates: Dec 12th -> Dec 29th (18 days)
Project By: 3Mates Games
Backers: 50
Average Pledge Per Backer: $6 AUD
Funded: $304 AUD of $100 AUD
Dates: Dec 12th -> Dec 29th (18 days)
Project By: 3Mates Games
$304 AUD
current pledge level
Last Updated: December 29 @ 22:02 -0500 GMT
304%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
More Videos & Pictures ..... 
December 24th - via: kickstarter.com
HI Everyone, Happy Holidays to everyone and I hope you are all enjoying the festive period. I was asked what a built tower looks like so decided to give some more images and videos of what can be done. I have not printed everything and the heights... (Read More)
Another Tower and More Pictures!!
December 21st - via: kickstarter.com
Hi Everyone, The original tower design has been bugging me so I decided to do a second version of it. This is perfect for kids as it is smaller and will take up to 20 mm dice (maybe a bit bigger might work). It still fits a base and two main parts on... (Read More)
Message ... Backer Input Required
December 20th - via: kickstarter.com
Hi All, I have a couple of ideas that I would like to get your feedback on. If I was to send one file earlier to all backers to give you a chance to test print and dial in your setting prior to the end of the campaign, which file would everyone... (Read More)
Updated Files with Images ....
December 19th - via: kickstarter.com
Hi Everyone, I have had some more issues with the printer but have finally sorted that out and am trying to push out the sample prints as quickly as I can. I picked up an error with one of the files which caused some issues with the print which would... (Read More)
FUNDED!!
December 15th - via: kickstarter.com
A big thank you to everyone who has supported this project so far and those that will come on board before the end. I have been working on the printer all morning and it seems to be back up and running. I will continue to post pictures of the printed... (Read More)
More Files Added ....
December 15th - via: kickstarter.com
Hi Everyone, I have hit a bit of a snag with the test printing which has set me back until I can get the right parts to fix it!! In the meantime, I have done some modifications to the second tower design and have decided to include all the files in... (Read More)
Successful base print
December 14th - via: kickstarter.com
Hi All, I thought I would give you an update as to where the printing is at with the second tower design. So far I have printed the base and it has turned out pretty good. Here are the pictures with a comparison of the original tower so you can see... (Read More)
Tower 2 Files Complete ..... Almost!!
December 13th - via: kickstarter.com
I have finalised the design and files for the second tower. Here are the images so far: Dice Tower 2 Base Dice Tower 2 Main Dice Tower 2 Top The dimensions are:BASE 120 x 120 x 60 (W x D x H) in mmMAIN 120 x 120 x 70 (W x D x H) in mmTOP 120 x... (Read More)
More Images
December 12th - via: kickstarter.com
Here are some more images of the initial print as requested. Please excuse the quality of the print as this was my first time printing with PLA and I normally use ABS. Cheers, Stephen3Mates Games (Read More)
If you have additional news that doesn't appear here, shoot us a link!