SciFi Plague Warriors 6mm

A project in Berlin, Germany by Ankylo Miniatures
000days 
:
00hours 
:
00minutes 

Funding Successful

Miniatures for wargaming and roleplay
Backers: 429
Average Pledge Per Backer: €8

Funded: €3,618 of €300
Dates: Nov 21st -> Dec 12th (21 days)
Project By: Ankylo Miniatures
Tags:
Aw shucks, no tags yet. +Suggest

Suggest Tags

Begin typing to search or pick from a list. You can add multiple tags at the same time!
SubmitCancel
Saving your suggestions...
Suggestion Saved Successfully
Thank you for your help! The Kicktraq gnomes will get to work on your suggestions very soon.

Please keep in mind not all suggestions may be used, and repeated re-submissions may result in being rejected automatically (and we don't want that to happen).

If you have any questions, have a good idea for a tag, or a more in-depth suggestion - please feel free to let us know!

Ok
Hrm... something went wrong.
Hey, bad things happen to the best of us. Don't worry, the gnomes have been dispatched. Maybe try again in a little while.

Ok

€3,618

current pledge level
Last Updated: December 12 @ 05:13 -0500 GMT

1206%

of goal
funding period ended

€0

trending toward
Trends are not projections. Read More >>

0%

of goal

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

Now you can share!

Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.

Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.

HTML for websites & blogs
Copy HTML

BBCode for forums
Copy BBCode

Reddit code for... well, Reddit
Copy Reddit Code

Special Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.

You can read more about it here.
Latest News

Bases added.

December 8th - via: kickstarter.com
Added the STLs of the bases that i used for rendering purposes, in case anyone want to print them.  (Read More)

Miniature Overview

December 7th - via: kickstarter.com
While the work on the models goes on, here is an overview over the complete range. The pack contains over 40 different STLs plus the pre-supported versions. The Plague Walker is the only multi-part model and needs a little bit of assembly after it is... (Read More)

Plaguelings!

December 6th - via: kickstarter.com
These little guys complete the campaign. They are no stretch goal on its own but added to the daemon stretch goal for free.  Two 20mm round bases (Plagueling Horde - one with a Plague Oak), 5 single Plagueling sculpts with small bases. The single... (Read More)

Walker Weapon-mounts and Plagueling

December 5th - via: kickstarter.com
Today is printing and testing day! Some work on the Walker to make the weapon mounts match the size of the old Titan weapons (pictures will follow). Additionaly some testing with the last daemon slot.  Here is a render of the first test sculpt - a... (Read More)

Today: Walker Scaling and pre-supporting

December 4th - via: kickstarter.com
Was able to find an old epic Knigth and took a shot for size comparison.  This version matches nearly perfect the size of a knight (weapons are not attached so the volume seems a little bit smaller). Please excuse the resin color.  Its a water... (Read More)

Plague Beasts added to the Daemons Stretch Goal.

December 3rd - via: kickstarter.com
The three different versions for the Plague Beasts are done and added to the Daemons Stretch Goal. They need no support so printing will be easy and i am pretty sure, that they are fun to paint. :) Here is a little render of the bad boys:  (Read More)

Plague Daemons addition

December 2nd - via: kickstarter.com
To complete the Daemon slots - added a Plague Beast to the Daemons. Hope you like the little beast. Because they are infantry in the army list, three of them fits on one epic base.  (Read More)

Size comparison Plague Walker

December 1st - via: kickstarter.com
Length of the APC and the crawler is 20mm. What do you think? Is the Walker big enough in comparison or do i need to beef it up? At the end everybody can scale down or up before printing but the supports needs an adjustment if i change the size for... (Read More)

Plague Floater without base.

November 30th - via: kickstarter.com
Added a second version of the "Plague Floater" without base. The cylindrical hole at the bottom has a diameter of 2mm.    (Read More)

Models for test-printing/painting.

November 28th - via: kickstarter.com
Two additional models for test-printing and painting.  One "Plague Warrior" and one "Elite Plague Warrior". Happy printing! https://www.amazon.de/clouddrive/share/BEhTjQs4icwkxxty3nmC6ChVWRp3uya7Qt34YjVqMi3  (Read More)

A new stretch goal was added.

November 28th - via: kickstarter.com
Plague Crawlers - one "normal" and a possessed one.  (Read More)

Version 1 of the "Plague Crawler" and support removing.

November 27th - via: kickstarter.com
Plague Crawler V1 First version of the "Plague Crawler" is almost done.  Here a little video from the support removing: You'll need an HTML5 capable browser to see this content. Play Replay with sound Play with sound 00:00 00:00 The model was... (Read More)

First Elite Plague Warrior for printing.

November 26th - via: kickstarter.com
The work on the Plague Thrower goes on.  Here is a download link for one elite Plague Warrior so everyone can print the first plague guy. Happy printing! https://www.amazon.de/clouddrive/share/TeBZgCRBcxvIUlh5zVeQbk7jnlrMHKGTO5nMo65nTeC  (Read More)

New Stretch Goal!

November 25th - via: kickstarter.com
Work in Progress but here is the first quick peak:  (Read More)

Plague Walker without Base

November 24th - via: kickstarter.com
Added an alternativ version of the Plague Walker without base. There is a bevel at the bottom of the feet to allow printing flat on the build plate and countering "elephant footing".  As always - this will run through some test prints.   (Read More)

APC Test Printing

November 23rd - via: kickstarter.com
The APC are running through several test prints with different support settings to find the sweet spot between printability and low surface damage. If this is done it goes on with preparing the walker without base (including test printing). Within... (Read More)

Track Update

November 22nd - via: kickstarter.com
The first Update for the APCs.  The test-prints will show if the details come out nice. Track Update!  (Read More)

Funded!

November 21st - via: kickstarter.com
A big Thank You!  to all our supporters! The Plague Warriors and Zombies are funded in a short time. So all this STLs are save and will come in two versions - unsupported + pre-supported. Looking forward to the next stretch goal!  (Read More)

If you have additional news that doesn't appear here, shoot us a link!